Point-of-Use commercial electric line is designed to provide hot water at the consumption point, eliminating costly temperature loss in long piping runs
Features & Benefits
Our family of point-of-use electric water heaters come in 2.5, 6, 10, 15,19.9 and 30-gallon models. They are available in 1440 W through 6000 Wand in 120, 208, 240, 277 and 480 voltages with a maximum temperature setting of 170° F. These units are suited for a wide variety of applications and small enough for installation in limited spaces where modest quantities of hot water are required.
Long Life Tank Design
Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance of the tank. Our R-Tech anode rod provides advanced technology and equalizes aggressive water action. This prolongs the effective life of the anode rod and in turn, the life of the tank.
Long Life Heating Elements
Our patented resistor elements a redesigned with a specially treated, double layer of magnesium oxide and copper to resist corrosion.
Rigid polyurethane foam insulation provides superior insulating qualities resulting in reduced operating costs.
Optional Wall Mount Kit
The wall mounting kit provides an easy way to mount the unit off the floor, out of the way for more useable floor space in a small area. Each kit is designed to be used on walls with 16" stud centers. All necessary parts are included in this easy to install kit. (Note: The 2-1/2 gallon model comes standard with a wall mounting kit.)
Automatic Temperature Control
A surface mounted thermostat automatically cycles on and off to maintain the water temperature at a desired preset level.
Temperature Limiting Control
Automatically and safely cuts off the power in the unlikely event that the water temperature exceeds 190°F.
Temperature and Pressure Relief Valve
CSA/ASME rated and factory installed.
EGSP30-CEGSP20 POU COM CONFIG=EGSP20-RRSE27N2HWEGSP20 POU COM CONFIG=EGSP20-RRSE20N2HWRC451P03NCEGSP20 POU COM CONFIG=EGSP20-RRSE27N2HWRC301P03NC