RTG-95DVN / RTG-95XN Tankless Models
Specifications
|
|
|
|
|
| |
|
Indoor Direct Vent
|
|
Outdoor
|
| |
|
|
|
|
|
 |
RTG-95DVN
|
|
RTG-95XN
|
| |
|
|
|
|
|
| |
11,000 - 199,000
|
|
11,000 - 199,000
|
|
|
25-5/8 (H) x 13-7/8 (W)
x 9-7/8 (D) |
|
23-5/8 (H) x 13-7/8 (W)
x 8-7/8 (D) |
|
|
54
|
|
|
85° to 140° F
|
|
|
4.3
|
|
|
7.4
|
|
|
9.5
|
| |
3/4"
|
| |
3/4"
|
| |
3 by 5 CONCENTRIC
|
|
N/A (Outdoor Installation)
|
| |
.82
|
|
|
0.82
|
|
|
All models are available in Natural Gas and Propane (LP).
For Propane replace the N with P when ordering.
- Factory set maximum temperature is 120° F. See Use and Care Manual for setting.
- Consult factory for information on sizing the application. Vent Termination Kits are required for Direct Vent models. Contact your distributor for details.
Proper gas pressure must be ensured to supply tankless gas water heaters – up to 199,900 BTU for RTG-95 models. (Consult your gas supplier)
Above estimates are for sizing purposes only.
These units are designed to meet or exceed ANSI (American National Standards Institute) requirements and have been tested according to D.O.E. test procedures and meet or exceed the energy efficiency requirements of NAECA, ASHRAE standard 90, ICC Code and all state energy efficiency performance criteria for energy consuming appliances.
purchasing this appliance, read important energy cost and efficiency information available from your supplier.
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas $1.218/therm; LP $1.87/gallon.