Rheem Specialty Series Heat Pump Pool Heater Series

Models M6350tiHC, M6350tiPD, M8350ti-E-HC

 

Features: Cabinet
  • Exclusive DuraSteel™ Powder-Coated Cabinet
    Polyester powder-coated, non-corrosive cabinet is more durable than plastic heat pump cabinets. Same rugged steel construction used by all the major air conditioner manufacturers.
Evaporator Coil
  • Large Air Coils
    Raised lanced-fin design maximizes heating at lower temperatures. Rheem engineered coils are highly optimized to meet our specific design requirements.  From the proper fins per inch to advanced distribution circuiting. We are the only heat pump pool heater company to actually manufacture our own coils.
  • Venturi Fan Cowling
    High-capacity 3000-cfm fan provides unrestricted air flow for better heating.  Precision engineered and manufactured cabinet design eliminates unwanted air gaps. This means more air over the coil which translates to greater efficiency.
Compressor
  • Scroll Compressor
    Scroll compressors are quiet and efficient compared to piston type compressors. They provide higher efficiency, lower sound levels, superior durability and unsurpassed reliability. The unique design of a scroll compressor actually wears in over time, not out!
  • Sound Isolation Pads
    Prevents sound transfer to equipment pad and elevates the base pan to improve water drainage. Its the little details like this that make Rheem products stand out from the crowd.
Heat Exchanger
  • Spiral Titanium Tube
    Our spiral titanium tube heat exchanger provides a corrosion-free waterway that can withstand the abuses of harsh pool chemistry. The spiral tube helps reduce deposit build-up and increases efficiency by performing a “scoop-and-lift” action.
  • Internal Bypass Valving
    Automatically compensates for normal day-to-day changes in your pool’s hydraulics, maximizing heat transfer efficiency.
  • Plumbing Connections
    Off-set 2” PVC union connections are included for ease of installation.
Controls - Digital
  • Pool/Spa Control
    Your digital heat pump pool heater can be set to have a different target temperature for your pool and spa. This allows you to dial in just the right spa temperature and never have to adjust it again. The pool can be set to a lower, more energy saving temperature.
  • Remote Compatible
    The digital heat pump pool heater can be easily controlled by most two-wire and three-wire remote systems.
  • On Board Diagnostics
    Tells the homeowner if there is a problem. Provides the service technician with detailed diagnostic information.
Controls
  • Heat-Cool Selector Switch
    Go from heat mode to cool with a push of a button.
Refrigerant Circuit
  • Reversing Valve
    Heat-Cool units have a unique reversing valve that allows the heat pump pool heater to cool the pool water during the hot summer months. 
  • Defrost
    Heat-Cool units have the unique ability to prevent ice from forming on the condensing coil. If freezing temperatures are sensed on the coil while heating, the unit can switch to the cooling mode. During the cooling mode, the refrigerant will be warmed by the pool water and send the hot gas to the evaporator coil to melt the ice. Once the coil temperature returns to a normal operating temperature, the unit resumes heating the water. This process only takes about 4 to 6 minutes to complete.
Power Defrost Models Refrigerant Circuit
  • Hot Gas Bypass Valve
    If the condensing coil senses freezing temperatures while running, the power defrost feature will activate and allow some of the hot Freon gas to bypass the water heat exchanger and re-route it back through the condensing coil. This unique feature allows the unit to continue heating the water while it removes any ice that may have formed on the coil. This feature is a great benefit when trying to operate at lower ambient temperatures.

  • Two Sizes: 110,000 & 133,000 BUT/HR at 80/80/80
  • Power Defrost 117,000 BTU/HR
  • AHRI Certified and Listed
  • Scroll Compressor
  • Titanium spiral tube heat exchanger
  • 2" PVC Union connections
  • Digital Control
  • COP up to 6.2 at 80/80/80, meets Florida 4.0 Minimum COP

Documents

Brochure
I & O Manual
Technical Data
Warranty Information
Warranty Information

Warranties

Labor Warranty - 1 year (2 years Florida) if installed in a single family residential dwelling, 1 year if installed anywhere other than a single family residential dwelling

Parts Warranty - 5 years if installed in a single family residential dwelling, 1 year if installed anywhere other than a single family residential dwelling

 

quick links

Image Gallery

Customer Support

Product Categories

News Highlights